Masonry mortar factory
Output: 500kg-13t/h
Usage: Foundry sand, anti-cracking mortar, plastering mortar, bonding mortar, decorative mortar, masonry mortar…
Product introduction
The small dry powder masonry mortar mixing production line covers a small area, is cheap and easy to operate, and is very suitable for small factories.
The solution consists of 6 processes:
Manual feeding → lifting → mixing → secondary lifting → finished product storage → weighing and packaging;
1). Artificial feeding: manually feeding raw materials and additives into the mouth;
2). Lift the material: then lift the material into the mixer through the elevator;
3). Stirring: The mixer fully stirs the materials for about 5-10 minutes;
4). Secondary lifting and discharging: After the discharging is completed, it will be transported to the finished product warehouse through the secondary lift;
5). Finished product warehouse: After receiving the materials, the finished product warehouse is put into storage;
6). Weighing and packaging: Automatic weighing and packaging through the packaging machine at the exit of the finished product warehouse.
Applicable materials
Used for foundry sand, anti-cracking mortar, plastering mortar, bonding mortar, decorative mortar, masonry mortar, gypsum mortar.
Product parameters
|
Model |
Main motor |
Production capacity (T/H) |
|
MINI-1000 |
7.5 |
|
|
MINI-2000 |
11 |
2-6 |
|
MINI-3000 |
15 |
3-9 |
|
MINI-5000 |
22 |
5-10 |
